alb3817295

Wright Flyer Replica in Wind Tunnel

On December 17, 1903, the Wright Brothers made the first powered flight and, in March 1999, a full-scale replica of the 1903 Wright Flyer was mounted in NASA Ames Research Center's 40-foot by 80-foot wind tunnel for tests to build a historically accurate aerodynamic database of the Flyer. For two weeks, engineers studied the replica's stability, control and handling at speeds up to 27 knots (30 mph) in the wind tunnel. The Wright Flyer replica was constructed by a team of volunteers from the American Institute of Aeronautics and Astronautics using plans provided by the Smithsonian. The replica featured a 40-foot-4-inch wingspan reinforced with piano wire, cotton wing coverings, spruce propellers and a double rudder. Although it replicated the 1903 Wright Flyer in design, size, appearance and aerodynamics, some changes were made to make it stronger for mounting in the wind tunnel.
Teilen
pinterestPinterest
twitterTwitter
facebookFacebook
emailEmail

Zu einem anderen Lightbox hinzufügen

Zu einem anderen Lightbox hinzufügen

add to lightbox print share
Haben Sie bereits ein Konto? Anmelden
Sie haben kein Konto? Registrieren
Dieses Bild kaufen
Daten werden geladen...
Titel:
Wright Flyer Replica in Wind Tunnel
On December 17, 1903, the Wright Brothers made the first powered flight and, in March 1999, a full-scale replica of the 1903 Wright Flyer was mounted in NASA Ames Research Center's 40-foot by 80-foot wind tunnel for tests to build a historically accurate aerodynamic database of the Flyer. For two weeks, engineers studied the replica's stability, control and handling at speeds up to 27 knots (30 mph) in the wind tunnel. The Wright Flyer replica was constructed by a team of volunteers from the American Institute of Aeronautics and Astronautics using plans provided by the Smithsonian. The replica featured a 40-foot-4-inch wingspan reinforced with piano wire, cotton wing coverings, spruce propellers and a double rudder. Although it replicated the 1903 Wright Flyer in design, size, appearance and aerodynamics, some changes were made to make it stronger for mounting in the wind tunnel.
Persönlichkeiten:
Bildnachweis:
Album / NASA/Science Source
Freigaben (Releases):
Model: Nein - Eigentum: Nein
Rechtefragen?
Bildgröße:
3600 x 2808 px | 28.9 MB
Druckgröße:
30.5 x 23.8 cm | 12.0 x 9.4 in (300 dpi)